For backpacking, cycle touring, paddling, general boating, travel
Colour : Pacific Blue
Weight : 44g, 1.55oz
Dimensions : Ø 15cm x H 33cm, Ø 5.9" x 13.0"
Lightweight 70D Nylon with fully taped seams
10,000mm waterhead, lightweight durable Nylon
White interior for greater interior visibility
Non-wicking roll top closure
D-ring attachment point at buckle
Double stitched seams
Repair buckle size - 5/8in, 15mm (2-Pin)
70 denier 210T Nylon with a white interior polyurethane (PU) coating.
The High density 210T weave gives the fabric a stronger tear strength and greater durability.
The white PU coating increases brightness when looking into dry sacks made with this fabric..
This 10,000mm waterproof fabric is used in the lightweight dry sacks
Size Comparisons :
Oval Base x Height, Weight
1L : ø11 x 24cm, 30g
2L : ø13 x 29cm, 38g
4L : ø15 x 33cm, 44g
8L : ø17 x 46cm, 58g
13L : ø22 x 53cm, 72g
20L : ø25 x 61cm, 86g
35L : ø30 x 70cm, 115g
Please Note :
Any roll-top dry sack must be closed properly to ensure water can’t get in.
Begin by folding the Hypalon™ strip down first and be sure to have at least three rolls before closing the buckle.
Avoid contact with sharp objects or subjecting the sack to high abrasion, as this could compromise the waterproof fabric
Like all manufacturers of roll-top, fabric dry sacks, Sea to Summit recommends that sensitive electronic devices be ‘double bagged’ (i.e. putting electronics inside one dry sack then placing this inside a second dry sack).
For maximum protection, the use of a waterproof hard case should be considered.
Not intended for situations where dry sack will be submerged under water