With 300 lumens of brightness and uniform, comfortable lighting, the TIKKINA® headlamp lights up your evenings under the stars!
It's just as good for reading in your tent as it is for getting around the campsite or hiking
Popular with farmers, vets and workers who need reliable proximity lighting
It's easy to use, with a single button and a symmetrical headband for adjusting the size
Compact and lightweight, it slides easily into your pocket or a backpack, so you can take it with you anywhere
TIKKINA® comes with 3 standard Duracell AAA batteries and is also compatible with the CORE rechargeable battery, thanks to its HYBRID CONCEPT design
Colour: Red
Brightness: 300 lumens (ANSI/PLATO FL 1)
Weight: 92g
Beam pattern: Flood
Energy: Three AAA/LR03 batteries (included) or CORE rechargeable battery (available as accessory)
Battery compatibility: Alkaline, lithium or Ni-MH rechargeable
Certification: CE
Watertightness: IPX4 (weather-resistant)
Features:
Compact and lightweight: only 92g
Homogeneous and comfortable proximity lighting:
- Wide, uniform beam so you can comfortably see up-close or at your feet
- Three lighting levels: MAX BURN TIME, STANDARD (better power/burn time balance) and MAX POWER
Easy to use:
- Single button for quick and easy lighting level selection
- Plate allows you to easily orient the lamp in desired direction
- Detachable, washable headband that is symmetrical for easy adjustment
- HYBRID CONCEPT design: TIKKINA® comes with 3 AAA/LR03 batteries and is also compatible with the CORE rechargeable battery (not included)
It automatically detects the energy source and adjusts lighting performance
- Compatible with the HELMET ADAPT and BIKE ADAPT 2 mounts, so you can fix the lamp on a variety of helmet types or a bicycle
WARNING: This lamp is not certified for road use: when used in an area governed by traffic regulations
Petzl lights are not a substitute for required standardized lights.
Watch:
TIKKINA (Vimeo 1min 4sec)
Petzl Hybrid Concept
| Lighting performance with the included 3 AAA batteries |
| Lighting performance as defined by the ANSI/PLATO FL 1 protocol |
| Lighting Colour |
Lighting Levels |
Brightness |
Distance |
Burn Time |
Reserve |
| White |
MAX BURN TIME |
7 lm |
10 m |
100 h |
- |
| STANDARD |
100 lm |
40 m |
10 h |
20 h |
| MAX POWER |
300 lm |
65 m |
2h |
| Lighting performance with the optional CORE battery |
| Lighting performance as defined by the ANSI/PLATO FL 1 protocol |
| Lighting Colour |
Lighting Levels |
Brightness |
Distance |
Burn Time |
Reserve |
| White |
MAX BURN TIME |
7 lm |
10 m |
100 h |
- |
| STANDARD |
100 lm |
40 m |
7 h |
- |
| MAX POWER |
300 lm |
65 m |
3 h |
- |
Lighting Performance ANSI/PLATO FL1 Protocol - American National Standards Institute [ANSI]
Brightness: This measurement is taken between 30 and 120 seconds after the headlamp is turned on.
It indicated the maximum light output, measured in lumens, when the lamp is first turned on using new batteries.
Lighting Distance: This is the maximum distance, measured in metres, between the lamp and the location where only o.25 lux of illumination remains.
The measurement is taken when the lamp is turned on, using new batteries.
Lighting distance depends directly on brightness, but mainly on the shape of the beam.
Burn Time: This corresponds to the length of time for which lighting remains optimal, from when the lamp is turned on, until 10% of maximum light output is reached.
Then it moves to reserve lighting.
Reserve Lighting: In hours, this guarantees a minimum light level for walking.
However, the light may not be sufficient for fast paced activities - such as running, mountain biking, skiing.....
Guarantee: Lamp: 5 years
Spares and Accessories available here